Turnable Corner

Mollymook House
Sunrise House

Features

Minimal Frames

Only glass is visible, maximising views

Enormous Panels

up to 6m² horizontally or vertically

Smooth Operation

Large, heavy panels glide around corners with ease

High Performance

High air/water resistance, high thermal insulation

Australian Manufactured

Customisation using Swiss components and Australian glass

Vitrocsa have designed the Turnable Corner system that allows huge sliding glass panels to slide around corners. Developed to optimise space by completely removing panels from view, leaving you with the maximum size opening.

With Turnable Corner you can slide panels not only left and right but around 1 or multiple corners. This opens up possibilities for architects that were previously could not be achieved.

Each panel can slide independently of each other and can be completely hidden along a wall down the side of a building or stacked inside a pocket/cavity. With the use of a unique roller system, the panels freely move in any direction and can be up to 10m2 (or 300kg) using single, double glazing.

A_Mention2017-black-small
Special Mention 2018 Architizer A+ Awards – Architectural Detail – Glazing Category in conjunction with MCK Architects for Turnable Corner System.

Multiple Corners
A design where there are multiple corners involved which would normally require fixed panels for these tricky situations and sliding panels installed only where there is a straight line. With Turnable Corner you can easily turn panels around multiple corners or angles and better still be able to remove them completely from view.

Click on the PDF below for technical brochure

› Download PDF

Characteristics Function Performance Service Options Configuration

Tracks + Frames

Recessed and hidden within the floor, wall and ceiling

Slimmest tracks & frames with high thermal qualities

Glazing

Single, Double, Triple glass

Panel size up to 10m2 or max. weight of 300kg

Drainage

Tracks designed to drain away water

Finishing

High-grade aluminium in natural anodised finish to 25 microns

Coloured anodising in Australia in numerous colours in 25 microns

Powder coating in Australia in numerous colours

Mechanism

Stainless steel ball bearings fitted to panels to allow sliding in any direction

Operation

Smooth manual operation

Maintenance

Aluminium and stainless steel parts require minimal maintenance
Extreme reliability and durability keeps maintenance to a minimum.

Thermally broken tracks and frames ensure highest performance ratings.

Extremely high thermal insulation in profiles and in frames to maximise energy and cost efficiency.

High air and water resistance.

Options for energy or cost efficiency, and meeting energy requirements are achieved using single, double and triple glazing.

Australian manufacture of Swiss profiles and Australian components
Australian assembly allows for precise on-site adjustments
Swiss designed and developed with a strong emphasis on research and development
Sole distributor in Australia and as a team focussed on service, quality and the successful installation of each and every project.
Team of trained, highly precise technicians install all Vitrocsa windows and doors.
With so many options and possibilities we provide inspiration, guidance and encourage involvement at the design stage for the best outcome.
Product customisation and development to meet the needs of your project with up front design service

Locks - Various options available for locking mechanisms including electric locking
Pocket - We create a parking bay which is a designated area to place the panels removed from your opening. A custom-made pocket by your builder will provide the ultimate solution to remove panels from view.
Trickle Air Vent - Allows for a continuous flow of fresh air without a security risk
Screens - Any material can be fit to our profiles including timber, stone and steel panels